- 1962 Variety?
- Error Die Deterior. | 1964 Variety?
- Error Filled Die | Die Error
- Error MDD | 1980d Rpm?
- Error Die Deterior. | Questionable Steel Cent
- Error MDD | 1936 Ddo
- Error Other | WIDE "U" In Trust
- Error Clash/Break | Double clashed die
- Error MDD | Reverse doubling?
- Error Die Crack | 1952 D ???
- Error Mis-aligned Die | Your opnion of what this is
- Error Clash/Break | Another find
- Error Clash/Break | 1958 D
- Error Planchet | Does this look post mint or mint
- Error Die Deterior. | 1936 Variety?
- Error Die Crack | Reverse Marks
- Error MDD | Triple RPM/Strike?
- Error MDD | Proof OMM or MDD
- Error Lamination | 1993 Cent Dots
- Error MDD | 1941 S machine doubling
- Error Clash/Break | 1998 DIE CLASH - Better Pics
- Error MDD | Triple Date and MM
- Error Clash/Break | Die Chip
- 1994 rotated reverse 165 degrees cw
- Trails
- 1994 rotated reverse 165 degrees ccw
- Error MDD | ONE CENT Doubling?
- Error MDD | One Cent America, United
- Error MDD | DDO or MDD on Date. Your Call
- Error MDD | Possible DDO
- Error Filled Die | Where's the T
- This 1940 Way Off RPM Possible
- Error MDD | Is this mint mark normal?
- Trail Die
- Error Die Crack | Die Chip inside the 9?
- Error MDD | MM Hill
- Error MDD | 1945
- Wide & Close AM's
- Trails Found Tonight
- Error Other | A little bit of everthing..lol
- Error Die Crack | This a die crack?
- What's going on with this?
- 1983
- 1994 Die Trails
- 1995-D Unlisted
- Error Other | Striations Marks on Reverse
- 1956 D.. Close MM2DT
- Error Lamination | Lamination Error
- Error Lamination | Is this a lamination?
- Error Filled Die | 1958 P finds
- Error Rotated Die | 1911-D rotated ~20 degrees CCW
- Error Die Crack | 1983 Cent with issues
- Error Clash/Break | Double Clash
- Error Struck Through | Recent Finds
- Error Rotated Die | 2001 Rotated
- Error Clash/Break | Thought I had a 2006 Doubled Ear...
- 2007 P Lava Nickel
- Error MDD | 1972 Mdd?
- Error MDD | 1984 DDO or MDD?
- Error MDD | 1970S rpm1
- 1983P Rotated Die
- Error MDD | 1937p
- 2004 small cud. DDR also?
- Error Plating | 1993-D Missing 90% Cu
- My Finds Yesterday
- 1993 Filled Die
- 1986 wierd mound + dbl 6
- Error CUD | 1989p
- 2008 P Lincoln Cent Question
- Error Clash/Break | 1983 Counter Clash
- Error Clash/Break | 1975 d clash?
- 1981-d Rpm
- 1998 with trails
- 1995-D Doubled Ear?
- 1983 Brass
- 1984 LMC Ejection doubling ?
- Error Clash/Break | 1983 Counterclash
- 1946 lamination
- Error Filled Die | 1993 worn die ?
- Error MDD | Here's a Strong MDD
- 2002-p Lmc
- Error Die Crack | 1991
- 1971d
- Just a few I found...
- 1968-s
- 2000-p double strike
- 2007 Brass Cent
- 1999-P Broad Struck
- Error Rotated Die | 1994 Rotation Error
- 1983-p LMC Die Rotation with Die Clash
- Error CUD | 1991 CUD Just found
- 2006 Plating error?
- Error MDD | 1998p
- Error Lamination | 1960P Lamination error
- Error Planchet | 1993D Damaged Planchet
- Error Plating | 2003P Brass Planchet
- Error Plating | 1991P Brass Planchet
- Error Clash/Break | 1983p
- 2000 P Dropped Letter Lincoln
- Error Other | 1982 extended E on Epluribus
- A few trails I found today
- Error Lamination | 1962 D lamination?
- 81 Struck Dime
- 1989P "8" in DATE
- Nice 1993 prisoner die clash (both sides)
- Capped die?
- 1987-p droped tie ?
- 1946 Lamination & Die Crack
- Die Cap or Grease Job
- Error Planchet | Blank Planchet found in circulation.
- 1991d
- Error Die Crack | 1990
- Doubled die or MDD?
- 1971 S 3 Clips ?
- Error Broadstrike | 1999 Broadstrike (Nice!)
- Here you go Joe!!
- Error Off-Center | 2 More way off!!
- 1999 Off Center
- 1967 cent is it a lamination error ?
- Error Plating | 1995 Struck On Unplated Planchet
- 1991P Lamination ERROR
- Error CUD | 1919 Wheat
- 1988 cent retained die break?
- 1989 MD or DDO?
- 1999 error - reverse
- 1968 S Proof centThick Planchet"?
- Error Planchet | 1944 Clipped???
- Error Lamination | 1977d
- 1974-P grease or other?
- Crack leading to a blob
- found a coin
- Error Lamination | 1960 D DDO #3 with Lamination?
- Error Lamination | 1973d
- Error Lamination | 1975 d
- 1988-p cud
- Error Lamination | 1952-D Sad day for Lincoln
- Error Other | 1958 D error
- 1983-D Double D
- Error Rotated Die | 1994-P Rotaded Reverse 180+ or 160 ?
- 1988 off center 75%
- Error Lamination | 1921 p
- 1956 1DR-001 BIE Error
- 1999 rev die break ??
- 1999 rev secound error
- 1999 obv
- Error Die Crack | 2000 rev
- Error Planchet | Weak Strike / Underweight Planchet
- 1957 d/d & 1do-002
- Error Lamination | 1916 p
- Would this be split planchet or PMD?
- 1969-D Lamination?
- 1972 P Interesting Cud West of LIBRETY
- 1998p on a thick planchet
- 1984 Wire ?
- 1991-P Grease obverse/reverse ?
- Error Die Crack | 1959-D Die crack?
- Error Filled Die | 1953-P Nice Error
- Error Off-Center | 1993
- Error CUD | 1989 (?) cud
- Error Struck Through | 1997(?) struck through grease (both sides?)
- Error Multiple Strikes | Fantastic In Collar Double Strike 1982 SDZ
- 1947-S cent
- Error Struck Through | No-Date struck thru ?
- 1963D say what?
- Error BIE | 1995p bie
- Error Planchet | are eiher of these clipped planchets?
- weak strike
- 1958 D With Die Chip and Possible RPM.
- 1939 lamination
- Error Planchet | 1945S Tapered/Rolled Thin Planchet
- Concentric Lathe Lines Info
- Error Lamination | My best lamination find
- Error Clash/Break | 1985-P Reverse Die Clash
- Error Clash/Break | 1984 Prisoner and partial date
- 1992d
- Error CUD | A mini mini rim cud on a 1956D
- 1995P-1DER-025T or is it?
- 2009 errors already??
- 1999-1DER-005WS Obverse #2
- Error Mis-aligned Die | Double misaligned die
- Error Lamination | Die Crack and a Lamination Example
- 2007D Obverse Trails
- 2008p
- Error CUD | 1984-p cud
- Coin Show Finds - some known, some not..
- 1995D-1DER-009T Without the Die Markers?
- Error Lamination | 1935s
- 2008 trail
- Error Other | 1988-P Looks strange?
- Error MDD | 1983d (Mechanical Doubling)
- Error Struck Through | 1972-P Any idea what it is?
- Error CUD | 1988-P Major Reverse CUD
- Error Other | 1964 doubled U in TRUST (Die Dent)
- Error Clash/Break | Beautiful Die Clash found last night...(OBV/REV)
- 1999 Reverse Trails 300 Degrees
- Error Clash/Break | 1995P Rev Die Break
- Error Die Crack | 1995 p
- 1984 DDO or MDD?
- New Die!!!!
- Error Clash/Break | 2007p
- Error Other | Partial Collar
- Error Die Crack | Speared Cabin
- Error Struck Through | 1975-p
- Error Broadstrike | 2001 p
- Error Lamination | 1941-P Lamination?
- Error CUD | 1982 Beauty
- Error Multiple Strikes | need help with this one!!!!
- Error Planchet | Clipped or nipped
- Error Lamination | 1961-D Lamination Error
- Error Clash/Break | How can you tell if it's a Hub break or Laminated die?
- Error Die Crack | 1863 Indian Cent
- 1998-P reverse die trails
- Error Other | 1970/0 Reverse - check this out
- Error Planchet | 1979-P Clip
- Error MDD | Possible D over D?
- Error Lamination | 1952-S With Large Lamination
- Error Lamination | 1920, 1930, 1948 Laminations
- Error MDD | 1990-P Doubled eye
- Error Off-Center | 2000 brockage strike, 35% off-center and broadstruck
- Error Struck Through | Cloth/obverse
- Error Other | 1968-d ???????????
- Error Struck Through | 2001-P Obverse/Reverse Greased?
- Error Die Crack | die crack
- Error Clash/Break | 1960P BU Retained Die Break
- Error CUD | 198x-p cud
- Error Filled Die | 198? p week strike?
- Error Other | PMD of Straight Clip?
- Error Struck Through | 1981P Struck through grease
- Error Rotated Die | 2005 D about 25 degrees CCW
- Error CUD | 1975-p cud
- Error Off-Center | No date
- Error Other | What is this called?
- Error CUD | cud?
- Error CUD | 1n god (cud) trust
- Error Planchet | Pre strike or post strike
- Error CUD | 1998 Double Error Cent
- Error Rotated Die | 1966-P Rotated Die.
- Error Multiple Strikes | extra 5 possibly?
- Error CUD | 1974-d cud
- Error Other | 1969-D NO FG - In Cherry Picker's Guide
- Error Other | cracked and/or filled?
- Error Other | yet another
- Error Lamination | 1941-P Lamination/Cud?
- Error Plating | 1994-P Plating Problem
- Error Other | 1986 P LMC- What Happened?
- Error Rotated Die | 1994 and 1996 rotated die
- Error CUD | 1940-S Reverse Retained CUD
- Error Die Crack | 1940-S Retained CUD #2
- Error Planchet | 1965P LMC - Valid clipped Planchet?
- Error Plating | 1/2 plated obv