PDA

View Full Version : Photoshop 7.0

CCC
03-15-2008, 10:24 AM
Does anyone here use Photoshop 7.0. I have tried to use instructions on another website. I am trying to learn overlay's comparing MM locations along with other functions of this program that will help in this hobby. Does anyone have any instructions on this?

CCC
Steven
03-15-2008, 10:40 AM
If you have a particular question I may be able to help.
CCC
03-15-2008, 10:48 AM
I can load the pictures side-by-side. I can also put them at the same size. From there I'm lost. I have tried Transparency, Graystyle, It makes not difference. I'm not that literate on these type programs. I have no pop-up window's that ask me what I want to do. I hope this makes sense.

CCC
Steven
03-15-2008, 11:00 AM
When you are ready to start on a layer set two photos you want to use on the program as in the photo below and let me know then we can go to the next step.
CCC
03-15-2008, 11:14 AM
Tornado Warning: Be back soon
Steven
03-15-2008, 11:17 AM
I can't believe something like a tornado would delay the hobby.:LOL_Hair:

Be safe.....
Wheat Cents
03-15-2008, 11:24 AM
Photoshop is a good thread.. CCC . Any quick instruction on how take say 10 photos and put then in to 1 pdf ? Billy Crawford's DVN is loaded however , would not need that extreme .. Too BIG.
Steven
03-15-2008, 11:32 AM
CCC,
Hope your part of Atlanta isn't getting hit too hard. I see that some of the city has had it rough. Be carefull and be safe.
Wheat Cents
03-15-2008, 11:42 AM
I was there on biz three weeks ago.. Saw the news reports today... Man it got pummeled. Phoned a few friends they were OK . Wishing ya'all well.
CCC
03-15-2008, 11:50 AM
Thank's guy's. Everything fine here. You will hear on the new's about the death's in Polk County and counties to the East. There were at least 3 tornado's that I know of. 2 still on the ground. Watch the news. I will continue the Photoshop thread later.

CCC
CCC
03-15-2008, 02:11 PM
OK. Thing's have calmed down here. Steven, I have 2 photo's side by side. I want to do a overlay with them. What do I do now?

CCC
Steven
03-15-2008, 02:20 PM
Well lets do a simple lay over withiout trying to get the sizing right at first. On the tool bar it will show a MOVE TOOL (four pointed arrow) click on it then click on one of the photos. Then click and hold on that photo and drag it over the other.
Lets see where we are at that point.
CCC
03-15-2008, 02:24 PM
Well lets do a simple lay over withiout trying to get the sizing right at first. On the tool bar it will show a MOVE TOOL (four pointed arrow) click on it then click on one of the photos. Then click and hold on that photo and drag it over the other.
Lets see where we are at that point.

Ok, It's done
Steven
03-15-2008, 02:26 PM
At the top of the page there is the word window click on it and drop down to layers and click on it. That shown bring up a small window showing layers and percentages.
CCC
03-15-2008, 02:37 PM
I have a Layer tab. It consist's of: New, New Fill Layer, New Ajdustment Layer. I see nothing of percentages.
Steven
03-15-2008, 02:39 PM
Don't want to use the layer tab. Use the window tab. Drop down to layer and click on it. When you do that will leave a check mark by it and open a small window.
CCC
03-15-2008, 02:55 PM
Don't want to use the layer tab. Use the window tab. Drop down to layer and click on it. When you do that will leave a check mark by it and open a small window.

Done

CCC
Steven
03-15-2008, 03:10 PM
In that small window there should be two percentage boxes Opacity and Fill. set the fill percentage to about 50. this should allow you to see both photos in the same frame especially if the are offset a bit. you can still click on the photo and move it around at this point.
CCC
03-15-2008, 03:31 PM
In that small window there should be two percentage boxes Opacity and Fill. set the fill percentage to about 50. this should allow you to see both photos in the same frame especially if the are offset a bit. you can still click on the photo and move it around at this point.

I don't see the window your speaking of. I apologze for my incompetece.

CCC
Steven
03-15-2008, 03:36 PM
Go to the photo I put in this thread showing the photoshop page and it shows a small window in the lower right. this is what should conme up when layer is checked in the window drop down.
CCC
03-15-2008, 03:44 PM
Yes, it is the photo of the second photo.

CCC
Steven
03-15-2008, 03:48 PM
Ok,
What all is on you photoshop page now as far as photos windows open, what are you seeing.
CCC
03-15-2008, 03:56 PM
I have a 1952 D MM001 and a 1952 mm006.

CCC
Steven
03-15-2008, 03:59 PM
The next step would be to get that little window for layers to come up by checking LAYER under the window drop down at the top of the page.
Pat
03-15-2008, 04:49 PM
Does anyone here use Photoshop 7.0. I have tried to use instructions on another website. I am trying to learn overlay's comparing MM locations along with other functions of this program that will help in this hobby. Does anyone have any instructions on this?

CCC

Hrm.. I use Photoshop CS3 Extended myself..

The simplest way is open the Image..

Then use FILE-->Place the next image will appear as another layer..

Then change the opacity of the layers..
CCC
03-16-2008, 11:30 AM
Hrm.. I use Photoshop CS3 Extended myself..

The simplest way is open the Image..

Then use FILE-->Place the next image will appear as another layer..

Then change the opacity of the layers..

I also have Photoshop Elements 5.0. I don't have a clue about how to use it either. What is CS3?

CCC