PDA

View Full Version : 1961-d

kloccwork419
09-25-2010, 10:41 AM
I found this in a roll. It matches up with RPM-005 in placement but I dont see anything of a 3rd MM. No markers match. I cant find another that matches with this.

Any clues?
DoubleYou
09-25-2010, 10:49 AM
1961D-1MM-006 (http://www.coppercoins.com/lincoln/diestate.php?date=1961&die_id=1961d1mm006&die_state=mds) looks like it's a decent fit.
kloccwork419
09-25-2010, 11:16 AM
006 shows a vertical bar and some on the inside of the MM. The RPM on mine is just north
jfines69
09-25-2010, 03:26 PM
Could be an EDS!!!
Jim
jcuve
09-25-2010, 03:33 PM
I can agree with RPM-005 - nice find Jason! (I do not think it is an EDS based on the die wear I can detect in the photo above...)
DoubleYou
09-25-2010, 03:49 PM
I just did an in-depth study of the two coins using my paint program, and the position analysis it rendered showed it was just a tiny bit off for 1MM-006. 1MM-005 seems to fit in the position, so I'm guessing yours is in a stage where the third D is invisible. However, you can never be sure until you check the die-agnostics (die markers).
kloccwork419
09-25-2010, 07:52 PM
No die markers match on any RPM listing.
atarian
09-25-2010, 10:06 PM
Here is my 61 D/D its too tilted i think to be a RPM 17 and i dont think theres anything to match this up with the 61 D/D/D that is also tilted

http://i145.photobucket.com/albums/r221/atari83/coins/1961d09262010a.jpg

http://i145.photobucket.com/albums/r221/atari83/coins/1961d09262010b.jpg

http://i145.photobucket.com/albums/r221/atari83/coins/1961d09262010c.jpg
DoubleYou
09-25-2010, 10:29 PM
Um, atarian!
All I see is html!
I think you're used to coppercoins forum!
atarian
09-25-2010, 10:31 PM
there we go.
DoubleYou
09-25-2010, 10:39 PM
<html>
<body>
<font face="Arial" size=+2>
<b>
Much, much better.
</b>
</font>
</body>
</html>
I love it!
jfines69
09-26-2010, 05:11 AM
Thanks for correcting me Jason... I did not even notice the die wear... That's why your the pro and I'm not... LOL!!!
Jim